Monday 9 May 2016

Different Types of DIY Fabric Painting Ideas

Fabric Painting 

Painting you dull fabrics and transforming them into the master piece is an art of appreciation. Learn this awesome hobby without much effort and money at "Craftopedia"!

Tie and Dye Technique

  • Wet the fabric and squeeze the excess water
  • Tie the fabric with tie cords/ Rubber bands at required areas using different kinds of ties such as beads, coins or grains.
  • Paint the untied area with thick coats using desired shades of fabric colours with applicator brush.
  • Allow to dry for 24 hours and then untie the cords. 
  • Iron the reverse side to fix colour on the fabric. 
This technique of tying  and dyeing helps to create Fabulous patterns on a plain fabric. 


Blending Technique 

  • Dampen the fabric.
  • Dilute the fabric colour with water.
  • With light strokes or dots apply two or more diluted colours on the fabric.
  • Allow the colours to blend with each other.
  • Dry for 24 hours.

Stenciling Techniques

  • Position the stencil design on the fabric holding it firmly with adhesive tape.
  • Prepare fabric colour in a pallet with a little water. Dip your brush in the fabric paint. Dab excess paint from the brush and stipple or apply on the fabric. 
  • use different colour combinations and shades by applying different colours in different areas of the stencil.
  • Remove the stencil to see the overlay full effect.
  • Let dry for 24 hours.


Stenciling allows you to reproduce a pattern or a design as many times as you like. 









Block printing Technique 

  • Draw a design such as a flower on the raw surface of a potato. Carve out the design. You can also choose vegetables and fruit having textured surface when cut (eg; lady finger, onions, pineapple etc). Leaves having interested shapes can also be used as block.
  • Hold the fabric in the place with adhesive place.
  • Apply a thick coat of fabric colour on the block with brush or sponge.
  • Place the block carefully on the fabric and press in firmly.
  • Lift the block without sliding or tilting.
  • repeat the procedure using different colour combination and different types of blocks.
  • Dry for 24 hours. 


Share if you liked this article - 

No comments:

Post a Comment

How to make Trees for Dioramas | Artificial Trees for Architectural Mode...

Hello Craftopedians! Wire Trees Wire Trees made of Wool As the Title suggests, this is an Architecture Student Hack video...